Services & Pricing
Shop Specials
Save money, save time — my most requested services in one package.
Maintenance Package - $200
Keep your firearm running at its best with our full-service Maintenance Package. This includes a complete disassembly and inspection of all parts for wear, detailed cleaning ($100), headspace check ($50), scope cleaning, re-torquing and ring lapping ($80), plus bore sighting to put you on paper at 25 yards ($40). $270 value for $200
Accuracy Package - $325
When every shot counts, precision matters. The Accuracy Package includes a full accuracy evaluation ($100), professional action bedding ($125), custom trigger tune ($80), and scope ring lapping ($80). $385 value for $325
*Add $50 for Tikka Rifles
Field Ready Package - $300
Head into the season with total confidence. The Field-Ready Package covers everything you need before your next hunt: full disassembly and cleaning with wear inspection ($100), complete accuracy evaluation ($100), scope cleaning, re-torquing, and ring lapping ($80), plus live-fire sight-in at 100 yards ($100). $380 value for $300
*Ammo not included
Economy Rebarrel - $700
Give your rifle a new lease on life with our Economy Rebarrel package. This package includes a new barrel ($325), professional threading & chambering ($350), cut & crown ($80), inletting the stock for a free-floating barrel ($100), and matching the new barrel finish to the rest of your rifle. $855 value for $700
Barrel Finishes: Stainless included, Hot Bluing add $200, Rust Bluing add $300, Cerakote add $200
*Package is for bolt actions only
*Requires $325 down payment
Premier Rebarrel - $1000
For the shooter who demands the highest level of precision. The Premier Rebarrel includes a premium cut-rifled barrel ($600), precision threading & chambering indicated off the bore using indicator rods ($400), cut & crown ($80), free-floating the barrel in the stock ($100), and finish-matching the new barrel to your rifle. $1180 value for $1000
Barrel Finishes: Stainless included, Hot Bluing add $200, Rust Bluing add $300, Cerakote add $200
*Package is for bolt actions only
*Requires $600 down payment
Mountain Hunter Rebarrel - $1300
Built for the backcountry hunter who counts every ounce but won’t compromise on performance. The Mountain Hunter Rebarrel features a premium cut-rifled carbon fiber barrel ($900), precision threading & chambering indicated off the bore using indicator rods ($400), cut & crown ($80), and free-floating the barrel in the stock ($100). $1480 value for $1300
*Package is for bolt actions only
*Requires $900 down payment
General Services
Please Note: All prices reflect Labor only — they do not include the cost of parts or material.
*Excessively dirty firearms will be charged per hour
**Minimum shop charge applies
***Does not include any metal finishing
Shop Rates
Minimum Shop Charge - $50.00
Per Man Hour - $80.00
Per Machine Hour - $100.00
General Services
Handgun Transfer - $40.00
Longgun Transfer - $30.00
Firearm Shipping - $40.00 + cost of shipping
-I will only ship to Licensed Dealers
-The $40.00 fee does not apply when returning work to a customer
Written Appraisals: Includes extensive research on particular model and current value estimates - $50.00 per gun
Consignment: Listing items on Gunbroker for sale - $50.00 per item + 10% of selling price
General Gunsmithing
Troubleshooting - Hourly Rate
Firearm Disassemble/Clean/Inspect/Oil: Complete disassembly of firearm, parts inspected for wear and recommendations made based on findings:
Rifles/Shotguns - $100.00*
Handguns - $100.00*
O/U & SxS Shotguns - $120.00*
Ultrasonic Cleaning - $80.00 per item
Accuracy Evaluation: A full evaluation of the 13 problem areas of a firearm to determine the source of the inaccuracy, followed by a recommended action plan - $100.00
Check Headspace - $50.00
Make Chamber Cast - $80.00
Remove Stuck Fired Case - $80.00
Remove Live Round - $120.00
Sightwork
Scope Mounting: Includes lapping of scope rings and properly torquing rings and bases - $80.00
Bore Sighting: Will get you on paper at 25 yards - $40.00
Sight in Customer Gun - $100.00 + Cost of Ammo
Drill & Tap Receiver or Barrel - $25.00 per hole**
Open Receiver holes to 8-40 thread - $40.00 per hole**
Cut Dovetail in Barrel - $85.00
Solder on Sight Base - $100.00*** per base
Barrel & Action Work
Thread & Chamber Barrel - $350.00***
Thread for Suppressor - $125.00***
Thread Protector - $50.00
Cut & Crown Barrel - $80.00
Install Barrel Liner - $250.00***
Install Pre-Fit Barrel: Includes removing old barrel, installing new one, and verifying headspace - $200.00***
Lap Bolt Lugs - $80.00
Trigger Tuning - Hourly Rate
Bolt Jeweling - $140.00
Metal Finishing
Polishing - Hourly Rate
Rust Blue - $450.00
Barrel Only - $300.00
Nitre Blue Small Parts - $80.00 per batch
Color Case Hardening, Cerakote, and Hot Blue are currently outsourced and pricing is available on request.
Stockwork
Glass/Epoxy Bedding
Recoil Lug Only - $80.00
Action Only - $125.00
Pillar Bed - $150.00
Add $25 for barrel bedding
Add $50 for Tikka rifles
Float Barrel - Hourly
Install Recoil Pad - $100.00
Install Metal Buttplate - Hourly
Crack Repair - Hourly
Oil Soaked Stock - Hourly
Wood Refinishing
Hunter’s Oil Finish - $250.00
Hand Rubbed Satin Oil Finish: Partially Filled Pores - $350.00
Hand Rubbed Gloss Oil Finish: Filled Pores - $500.00
Stock Duplication: All stocks are cut very precise on a Hoenig-Rodman duplicator and can be cut to your inletting specifications - Starts at $300.00 more details on pricing to come.
Hand-Cut Stock Checkering
Diamond Pattern - $100.00 per panel
Fleur Pattern - $150.00 per panel
Custom Patterns - Price on request
Recut Checkering - $80.00 per panel
-Add one panel for wrap around patterns
Custom Work
Building custom firearms for customers is truly where my passion lies. I specialize in building classic American firearms for the serious Outdoorsman or woman. My work is not meant to be hidden in the deep dark depths of your safe, it is meant to be used in the field and passed down from generation to generation.
If you are interested in building a custom rifle, handgun, or muzzleloader, feel free to contact me below for a quote! I only take on a few full custom builds a year, so availability is very limited.